Beschreibung
Afterburner 5 O3 6S HD Product Details
Description
Afterburner – The Performance 5inch by 2RAW and iFlight.
Afterburner is designed for professional pilots who use their FPV drones for cinematic work. This drone is not designed around being crashed into concrete and coming out fine. The drone is designed around aerodynamics and balance.
Changelog
- May 8, 2024: The Albatross antenna is available in two versions, and will be shipped randomly.
Highlights
- Smallest Footprint: Afterburner has a 20% smaller footprint than traditional 5-inch freestyle frames, allowing for easier transportation, increased agility, and less drag—resulting in better all-around performance.
- Aero Shell: The aeroshell controls the airflow around the body and within the drone. As the speed of the drone increases, the aeroshell acts as an air divider, preventing air from hitting the flat top plate. The shell also helps to shield the electronics from dirt and moisture, providing more confidence in critical situations.
- Advanced Truss Arms: The star design combined with trusses ensures great stiffness while keeping the weight down, providing perfect balance and delivering exceptional results with buttery footage.
- Bottom Mount Battery: Inspired by FPV racers, the bottom mount battery approach minimizes drag and completely clears the top of the drone for GoPro mounting and clear GPS line of sight. The central battery allows the CG to remain close to the middle of the body, improving agility in the air.
- No Prop in View with GoPro: In 16:9 aspect ratio, the GoPro has no props in view from 5 degrees to 60 degrees.
- DJI O3 HD Air Unit Low-Latency Digital Transmission: Up to 10 km video transmission range, ensuring crisp and smooth real-time view in your goggles, even in interference-heavy environments. (Source: DJI)
- 4K Stabilized Video with 155° Ultra-Wide Angle: High-grade imaging performance delivers exceptional visuals that will keep your audience on the edge of their seats. (Source: DJI)
Specifications
| Product Name | Afterburner 5 O3 6S HD |
|---|---|
| Geometry | True-X |
| FC | BLITZ F7 Flight Controller |
| ESC | BLITZ E55 4-IN-1 2-6S 55A ESC |
| Video Transmission | DJI O3 Air Unit |
| Frame | 210 mm Wheelbase |
| Motor | XING2 2207 1750KV Motors |
| Prop | GEMFAN 5.1X3.6X3 Propellers |
| Weight | 472±7g (Without Battery) |
| Dimensions (L×W×H) | 148x148x64mm |
| Max Speed | 160 km/h |
| Maximum Takeoff Altitude | 7000 m |
| Max Hover Time | Approx. 11 mins with 6S Lipo 1400mAh Battery W/O Load |
| Operating Temperature Range | -10° to 40° C |
| Antennas | Single Antenna |
| GNSS | GPS+SBAS+Galileo+QZSS+Glonass |
Video Transmission
| Product Name | DJI O3 Air Unit |
|---|---|
| Communication Bandwidth | Max 40 MHz |
| FOV (Single Screen) | 155° |
| Communication Frequency | 2.400-2.4835 GHz (RX Only) / 5.725-5.850 GHz (RX and TX) |
| End-to-End Latency | With DJI FPV Goggles V2: – 810p/120fps Video Transmission Quality: Latency < 28 ms – 810p/60fps Video Transmission Quality: Latency < 40 ms With DJI Goggles 2: – 1080p/100fps Video Transmission Quality: Latency as low as 30 ms – 1080p/60fps Video Transmission Quality: Latency as low as 40 ms |
| Max Video Transmission Bitrate | 50 Mbps |
| Max Video Transmission Range | 10 km (FCC), 2 km (CE), 6 km (SRRC) |
| Operating Temperature Range | -10º to 40º C (14° to 104° F) |
| Power Input | 7.4-26.4 V |
| Audio Transmission | N/A |
Packing List
| Item | Quantity |
|---|---|
| Afterburner 5 O3 6S HD BNF | 1 |
| Screw Bag | 1 |
| Battery Strap | 2 |
| Battery Pads | 2 |
Important
All iFlight BNFs are tested before shipment to guarantee the highest quality.
The Afterburner ships with Betaflight 4.5 RC2. This version currently prevents passthrough to BLHeli32, meaning you will not be able to access your BLHeli32 settings without flashing different firmware. However, this is not a problem as the drone comes fully set up.
Nicht für schweizer Kunden.
